Lake Shore Live Steamers > Images


Work Session - 3/17/10


Rick Nagy and Dick Clark work on brake line tubing to the trucks on a wooden body center seat car. Ken Brooks and Steve Zaken work on attaching the dummy gas tank housing back onto the engine.
Joe Banzer using a center punch to mark the bed plate of the engine. With the throttle valve replaced and boiler bolted back in place the shroud on East Winds boiler has been painted and put back on.
Bill Deptowicz and Ken measured and made a bracket to support the air horns they relocated to the front of the engine. Frank re-installing the appliances back onto the boiler.
Dick and Rick continue adding the new brake lines and are working on one of our eight foot cars. Here's grumpy Joe looking over the work that still has to be done to the Park engine.(not really!)
                                               
This site is copyright 2000-2018